There is a close relationship between surface preparation and inspection accuracy. Unless surface preparation is done in accordance with the inspection method and the degree of staining, it will be difficult to obtain reliable inspection results. The Non-Destructive Inspection Company has developed various surface preparation methods in aiming to maintain and improve inspection accuracy in the actual inspections of products.
∗Soft Blast (Patent pending)
(1) With the use of low hardness blast cleaning material, stains, rust, or scale may be removed without harming the target item.
(2) Safe thanks to low pressure (∼5 kg/cm2 ),
(3) Both dry and wet types may be used.
(4) With only a small amount of industrial waste produced, it is environment-friendly.
(5) Other work can be conducted in the surrounding area.
(2) Safe thanks to low pressure (∼5 kg/cm2 ),
(3) Both dry and wet types may be used.
(4) With only a small amount of industrial waste produced, it is environment-friendly.
(5) Other work can be conducted in the surrounding area.
∗Malic acid cleaning
(1) There is hardly any decrease in wall thickness due to corrosion in the target material.
(2) Applicable even to U-pipes and other complex shaped items
(3) Level of safety is high with no poisonous or toxic substances contained.
(4) Can be handled with lightweight compact systems.
(2) Applicable even to U-pipes and other complex shaped items
(3) Level of safety is high with no poisonous or toxic substances contained.
(4) Can be handled with lightweight compact systems.
Can also serve to maintain equipment and facility performance and improve thermal efficiency.
Soft Blast
 |
 |
|
Soft Blast system vehicle |
Soft Blast treatment cycle |
Malic acid cleaning
 |
 |
|
Malic acid treatment system |
Malic acid treatment cycle |
Example of application: Removal of inner scale of heat exchanger (AFC) heat exchanger tube
